Truck Mounted Sweeper ROOTS Liberty DX 4000 Air Syestem

Truck Mounted Sweeper ROOTS Liberty DX 4000 Air Syestem
KategoriTruck Mounted Sweeper
Di lihat99 kali
Harga Rp (Hubungi CS)
Beli Sekarang
021.8827609
0821.83419995
082183419995
intanmawakasejahtera@gmail.com

The Liberty DX Combines Power, Efficiency and Low Cost of Operation

The Liberty DX offers a Caterpillar 4-cycle diesel engine with a 4.35 cubic yard hopper, which is an economical combination for a rugged parking lot sweeper. The suction tubes on this recirculative air machine are both 10″ in diameter.

Liberty DX

Standard mounting is on an Isuzu Truck NMR 71L chassis. The sweeping hood is a blast/suction system. The pickup system is the left-to-right that’s standard for a parking area sweeper.

The 3024CT 4-cylinder Caterpillar auxiliary engine is a 2.2L turbo-charged engine that provides plenty of suction power for the 30″ impeller fan to handle the toughest debris a parking lot can throw at you.

In fact, many contractors find the power of Victory’s Liberty DX allows them to do construction sweeping, as well. This means you may well be able to hire your sweeper out for construction sweeping during the day and still run the machine at night on your regular sweeping routes.

The chassis has a standard 36-month limited warranty, and the Liberty DX and most all components, including the auxiliary engine, is offered with a limited 12-month warranty. Download our PDF specifications’ brochure for complete information or call your Victory Sweepers’ sales professional today.

DEBRIS HOPPER
Capacity ……………………………….4.35 cubic yards/ 3.32 cubic meters
Construction ………………………………………………………Stainless Steel
Exterior Finish …………………………………………………………..Vinyl Wrap
Interior Finish ……………………………………………………..Stainless Steel
Suction Tube Diameter …………………………………………………………10”
Suction Tube Material …………………………Replaceable, Polyethylene
Engine Shroud (optional) ……………………………………..Stainless Steel
Inspection Doors ………………………………………………….1 on each side
Inspection Door Opening ……………………………………………13.7” x 26”
Dump Type ………………………………………………………………..Hydraulic
Dump Cylinders ……………………………………………………..2 @ 4” x 16”
Dump Height ……………………………………………………………………….70”
Dump Controls …………………………………………………….Electric In-cab
Separator Screen Construction ……………………..2 pc Stainless Steel
Separator Screen Maintenance …………Hydraulic assist access door
AUXILIARY ENGINE
Type/fuel …………………………………4 Cycle / Turbo Aftercooled Diesel
Make …………………………………………………………………………….Perkins
Model ………………………………………………………………………404F-22TA
Number of Cylinders ………………………………………………………………..4
Displacement …………………………………………………135 cu in/2.2 litres
Bore ……………………………………………………………………..3.3 in/85 mm
Stroke …………………………………………………………………3.9 in/100 mm
Brake Horsepower ………………………………………………67 BHP/50 KW
Oil Filter ……………………………………………………………………….Spin on
Air Filter ……………………………………2 pc / Dry type w/ safety element
Safety Shutdown …………………………………………………….Oil Pressure
IMPELLER
Diameter …………………………………………………………………………….30”
Type …………………………….10 blade backward inclined high pressure
Drive ………………………………………………………..4 Groove banded belt
Construction ………2 Abrasion resisting grades of keyed welded steel
Mounting …………………………………2 Sealed & relubable ball bearings
Housing Construction ……………………………………………..Welded steel
Housing Type ………………………………….Unobstructed for open airflow
Liner …………………………………………………Replaceable corded rubber
Liner Bolts ……………………..Coated for increased abrasion resistance
HYDRAULIC SYSTEM
Pump Type ………………………………………….. Fixed displacement gear
Drive ………………………………………………………………………………Direct
Pump Capacity ………………………………………………………………5 GPM
System Filtration …………………………………………………………..6 micron
Reservoir Capacity …………………………………………………….13 gallons
Hydraulic Back-up System (optional)
Pump Type ……………………………………………………………….12 volt DC
Controls ………………………………………………………………………….In cab
Purpose …… Powers all hydraulic functions without auxiliary engine
DUST SUPPRESSION
Water Capacity ………………………………………………………..105 gallons
Tank Construction …………………………………………………..Polyethylene
Pump Type ……………………………………………………. 12 volt, Diaphram
Controls ………………………………………………………………………….In cab

CURB BROOM
Controls …………………………………………………………………Electric in-cab
Diameter ………………………………………………………………………………..39”
Drive ………………………………………………………..Direct – Hydraulic motor
Tilt …………………………………………………………………………Electric in-cab
Suspension ……………………………………………………………………….Spring
Bristle Type …………………………………………………………….Vertical digger
Bristle Material ……………………………………………Oil tempered steel wire
Bristle Length ………………………………………………………………………….26”
SWEEPING HOOD
Type ………………………………………………….Blast – Suction / Right to Left
Towing Type …………………………………………………………..2 Trailing arms
Suspension ……………………………………………………………………4 Springs
Up Storage …………………………………………………………….. Rubber stops
Type ………………………………………………………………………………..2 piece
Material ……………………………………………………………………Welded steel
Pressure Tube ……………………………………………..10” Diameter AR steel
Suction Tube ………………………………………………..10” Diameter AR steel
Hood Widths …………………………………………Standard 82”, Optional 90”
Flaps ………………………………………………………………………………..3 Total
Front ………………………………………………..1/4” x 6.5” non-corded rubber
Middle …………………………………………………3/8” x 6” non-corded rubber
Rear …………………………………………………….1/2”x 6” non-corded rubber
Skids …………………………………………………………………………..Single row
Skid Material ………………………………Steel with virgin Tungsten Carbide
“HOODS UP”’ (Anti-plowing) ………………………..Independent hydraulics
“HOODS UP” Controls ……………………………………………..Electric in-cab
CONTROLS
Type ………………………………………………………………………………..Electric
Location …………………………………………………………………………….In-cab
Circuit Breakers ……………………………………………Individually resettable
Switches ………………………………………………………………………….Rocker
Monitoring …………Hour meter, Tach, Oil Pressure, Coolant Temp, Volts

WEIGHTS AND DIMENSIONS
Total Empty Weight ………………………………………………………..9,900 lbs
Chassis Only Curb Weight …………………………………………….. 5,964 lbs
Wheel Base …………………………………………………………………………132”
Turning Diameter (curb to curb)……………………………………………. 38’ 7”
Overall Length ……………………………………………………………………..237”
Overall Height ………………………………………………………………………..99”
Overall Width …………………………………………………………………………92”
Sweeping Width (hood only) …………………………………………..82” or 90”
Sweeping Width (hood and left broom) ……………………………………101”
Sweeping Width (hood and dual brooms) ………………………………..116”
OPTIONAL EQUIPMENT
Engine Shroud LED Hood Lights Back-up Alarm
Spray Bar Spare Tire & Wheel Hand Hose 6”
LED Bar Light 12 Volt Backup Big Bumper
Dump Assist Shaker Tool Boxes Hopper Drain
Package Trays Tool Box Trays
STANDARD 12 MONTH LIMITED WARRANTY
12 Month, 1200 Hour Warranty
(whichever occurs first)

  1. Chassis – Limited 36 months or 36,000 miles
  2. Perkins Auxiliary Engine – Limited 24 mo or 3000 hrs
  3. Sweeper Unit – Limited 12 months or 1200 hrs
  4. Hydraulics – Limited 12 months or 1200 hrs
  5. Electrical Controls & Components – Limited 12 mo or 1200 hrs
  6. LED Lighting – Limited 12 mo or 1200 hrs
  7. Carbide Skid Shoes – Limited 12 mo or 1200 hrs
  8. Impeller Fan – Limited 12 mo or 1200 hrs
  • Truck Mounted Sweeper ROOTS Liberty DX 4000 Air Syestem