RSR 6000 is a re-generative sweeper, with a powerful auxiliary engine to support effective road sweeping. Inbuilt with dust suppression water spray nozzles. RSR 6000 is one of the most economical sweeper with low fuel consumption.
RSR 6000 kit could be mounted on a wide range of International trucks. The high airflow supports effective absorption of debris from the road. 6 cu.m large hopper ensures uninterrupted operation for a longer time.
- RSR 6000 is a re-generative sweeper, with powerful auxiliary engine to support effective road sweeping.
- Inbuilt with dust suppression water spray nozzles.
- Overall sweeping width of 3300 mm.
- Easy to access controls in drivers cabin.
- Water tank – 1000 liters.
- Dumping Height – 1100 mm.
- Auxiliary Engine 115 HP @ 2200 rpm
- Safety Shutdown Automatic Suction.
- Fan Type – Centrifugal Fan.
- Most economical sweeper with low fuel consumption.
OVERALL SWEEPING WIDTH
With One Broom : : 2700 mm (1000 Dia Broom)
Overall Sweeping Width : 3300 mm (1000 Dia Broom)
Suction Head : 2030 mm
AUXILIARY ENGINE
Manufacturer : John Deere
Model : 4045HF285
Induction System : Turbo
Combustion System : Direct Injection Diesel
Number of cylinders : 4
Displacement : 4.5 L
Bore : 106 mm
Stroke : 127 mm
Power Rating : 115 HP @ 2200 rpm
Cooling System : Liquid Cooled
Oil Filter : Spin-on
Air Cleaner : Dry Type
Starter : 24 Volts
Alternator : 24 Volts, 100 Amps
Battery : 24 Volts, 2 X 80 Amps
Safety Shutdown : Automatic
Acceleration
BASE FRAME
Front Diesel Tank : 300 Ltrs without Battery Box
Explosive Cap : Not applicable
Rear Diesel Tank : Not applicable
Rear Bumper : Sheet Metal
Tail lamp & bracket : LED
Mudguard : Rotomould
DEBRIS HOPPER
Capacity : 6 Cubic Metres
Construction : 3 mm – SS 409 & SS 304
Dumping : Hydraulic
Inspection Doors : One Each Side of Hopper
Inspection Door Size (Cutout) : 450 x 360 mm (Current Export)
Inspection Door – Ground to Door Bottom (Varies with truck) : 1500 (Current Export)
Dumping Controls : Wired Remote
Dumping Height : 1100 mm
Dumping Tilt Angle : 52 Degree
Interior Finish : Natural Stainless Steel
Exterior Finish (Paint) : White
Filter Screen : Automatic (Pneumatic)
Filter Screen Material : 3 mm – SS 304 & 409
Tool Box : One Each Side of Hopper
Overload Warning : Available
REAR DOOR
Thickness : 3 mm – SS 304 & 409
Drain Valve : 3 Inch – Brass
AUXILARY SUCTION
Type : Centrifugal Fan
Operating Direction : Forward
Suspension : Adjustable Spring Balance
Full Width : 2030 mm
Suction Hose Diameter : 350 mm
Blast Hose Diameter : 350 mm
Hose Construction : Reinforced Moulded Rubber
Skids : with Tungsten Carbide Inserts
Controls : Hydraulic Raise & Lower
Full Width : Adjustable Front Skirt
Front Flap Open : Electrical Actuator
AUXILARY SUCTION
Type : Centrifugal Fan
Operating Direction : Forward
Suspension : Adjustable Spring Balance
Full Width : 2030 mm
Suction Hose Diameter : 350 mm
Blast Hose Diameter : 350 mm
Hose Construction : Reinforced Moulded Rubber
Skids : with Tungsten Carbide Inserts
Controls : Hydraulic Raise & Lower
Full Width : Adjustable Front Skirt
Front Flap Open : Electrical Actuator
SIDE BRUSH
Type : Four Segment Steel Tined
Diameter : 1000 mm
Drive (Hydraulic) : Eaton
Speed : Variable Non-Reversing
Tilt Adjustment : Electric In-Cab (Hydraulic Cylinder)
Extra Pressure : Electric In-Cab (Pneumatic Cylinder)
Raise / Lower : Electric In-Cab (Hydraulic Cylinder)
In / Out : Electric In-Cab (Pneumatic Cylinder)
LIGHTS
Make : Narva LED 24V
Side Brush (Working Light) : 1 Unit Each Side
Suction Head (Working Light) : 1 Unit Each Side (Optional)
Rear Door (Working Light) : 2 Units
Aux Engine Bay (Working Light) : 1 Units
Amber Beacons : 2 Units (Front and Back)
Red Marker Light : 2 Units Top
Top Mount Tail Lamp : Narva LED 24V
HYDRAULIC SYSTEM
Type : Tandem Gear Pump (Casappa)
Fluid Capacity : 70 Liters
Drive : Direct Drive
Filter : 10 micron Spin-on
Strainer : 80 mesh
Level Indication : Level Indicator + oil level switch + temp sensor
Valves : Catridge type
Valves Make : Sun
Power Pack : Bucher 24V (Electrical)
DUST CONTROL
Water : 1000 Liters
Tank Construction : Polyethylene (Rotomould)
Fill Diameter : 100 mm (Tank Opening)
Additional water tank : Nil
Additional water tank construction : Nil
WATER SYSTEM
Front Spray Bar : Low Pressure + High Pressure
Twin nozzle at ends of spray bar : Optional
Front Spray Bar (Nozzle) : 7
Side Brush Water (Nozzle) : 3 on each side
Suction Head (Nozzle) : 2 on each side
Transition Tube water (Nozzle) : 3
Hopper Water (Nozzle) : 5
Wander Hose/Over Head Boom Water (Nozzle) : 1
Cleaning system (Machine) : Hose Reel with Hand lance
Spray Tip : Brass & SS
Tank Filling Pipe (50mm) : Applicable
Water Low Level : Electrical Limit Switch (Pump Off)
Hand wash / Drain : 1″ SS Ball Valve
ELECTRICAL SYSTEM (24 V)
Display : Murphy 4.5″ & 7″
Communication : CAN 2.0 B
Outputs : Murphy Solidstate (PDM)
Protection : Auto resettable
Controls : Moulded Rubber Keypad with illumination
Doorpods (With Canbus only) : One on each door
Connectors : Deutsch
PNEUMATIC SYSTEM
Make : Janatics
